Good afternoon homemade.
The long-awaited New Year holiday is approaching, and so I decided to make a colored flashing light for the holiday.
For homemade I will need:
Color Led tape 5 meters with remote control
Water pipe with a diameter of 50 mm
Piece of kitchen worktop
Compass
Jigsaw.
First, on the old countertop, I mark two circles, one on 160 mm and inside this second circle, with a diameter of 50 mm.
I saw with a jigsaw for marking.
Next, on a piece of pipe, I attach the LED strip.
I cut off the excess pipe and attach to the base.
I connect to the mains.
After a little thought, I decided to find a shade for her. It turned out to be a suitable orange plastic pot.
It turned out pretty well, with the remote control I choose the blinking frequency and color. By mood, it can be used with and without shade.
Thanks to all.
