I'm tired of holding the tablet do it yourself, and I decided to make a stand for the tablet.
To do this, I needed these materials:
1. Plywood (10 mm)
2. Electric saw
3.PVC glue
4. Sandpaper
5. Drawing tools
6. Stationery knife
7. Drill (3mm)
8. Bulgarian
9. Emery
Here is a drawing of the stand
First step:
I took the plywood, marked out the details and sawed off.
Second step:
Finished workpieces polished.
Third step:
I cut the grooves with a grinder and a clerical knife.
Fourth step:
I noted and drilled holes for the rod. The rod (4 pieces) made of a nail.
Fifth step:
I glued the support bar.
Sixth step:
Assembly of all parts.
Seventh step.
I varnished the stand.