Tools and fixtures

A pen multimeter (also known as a pencil multimeter) is very convenient when working in shields and on weight, in addition, this device compares favorably with a conventional multimeter in that the results

Such containers will help you to tidy up the workplace and store various small parts, whether it be screws, nuts, self-tapping screws, drills or all kinds of electronic components in one place.

This tool is intended for copying a certain angle and transferring it to the workpiece or for drawing parallel lines and is used in many fields of activity, whether it is repair,

This adapter is intended for installing the nozzle at a right angle, which allows you to work in hard-to-reach places or with increased comfort to use mills, cutting or grinding wheels. By

A T-shaped tip with a rubber tip is designed to replace damaged and install new flexible loops without overheating. The process of working with such a sting is closer to high-temperature gluing

Such a nozzle is a ribbed disk that will help you easily clean many surfaces from the remnants of all kinds of adhesive materials (stickers, films, double-sided tape and

With the help of such nozzles for drills and screwdrivers you can easily clean many surfaces from all kinds of contaminants. The brushes are made of nylon, the fibers in them are very stiff. Cellular

Such a nozzle will allow you to turn your drill or screwdriver (shank - 1/4 "hexagon) into a jigsaw. The files handle aluminum, stainless steel, wood or plastic. The nozzle itself

Nozzles are very firmly held and do not fly off, their maximum working revolutions are 12,000 rpm. The diameter of the nozzles is 80 mm, their thickness is about 25 mm. There is no beating during operation.

This "third hand" allows you to still fix the engraver at almost any angle of inclination vertically and horizontally (the main part of the rack is connected to the base by a ball mechanism),

This handle greatly improves the usability of both the original dremel (models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000 and 8200), as well as its Chinese counterparts.

Surely, many were faced with a situation where a self-tapping screw or screw is not screwed exactly in the center of the hole, but is shifted to the side, its head is fixed in a "sweat" at an angle, which sometimes does not affect

These devices are small stainless steel metal cylinders with a restrictive skirt and a center punch at the end and are used for marking work with the aim

These drills are designed to work with wood or plastic and allow you to drill holes and immediately chamfer or form in them recesses of a conical shape, for example, under the screw cover