When conducting subject photography, an even factor in high-quality photography is even diffused light. To achieve such lighting, photographers use such fixtureslike photo boxes. The master made such a box do it yourself. The dimensions of the photobox are 81 * 53 * 46 cm. For its manufacture, the master used the following
Tools and materials:
-Pine board;
- Putty;
-Fibreboard;
-Glue;
-Miter saw;
-Conductor;
-A screwdriver;
-Drill;
-Grinder;
- Clamps;
-Construction stapler;
Step one: making frames
Photo box is a box covered with a special fabric. The master collects the box from several frames. Frames are made of slats. With the help of a miter saw, he cuts the required number of racks. Assembles a framework. Fastens the rails together with screws and glue. For screws, drill holes with a jig.
Step Two: Drawer Assembly
Collects a box. Fills the joints with putty. After drying, the putty polishes the surface of the box.
Step Three: Cloth
With a cloth, the master closes the photobox from three sides. Cloth fastens with a construction stapler.
Step Four: Background
The photobox is covered with fabric on three sides. The other three sides are open. On the one hand, the master will take pictures, the other two sides (bottom and back) will be closed with the corresponding background.
For the background, the master makes a wooden stand. If necessary, the background can be replaced with another.
The lower part is covered with a laminated fiberboard.
Step Five: Lighting Setup
For lighting, the master uses.
Installs and configures.
Photo box is ready. Below are photographs of the removal using it.
The whole process of making a photobox can be seen in the video.