Today we will make a stand for the phone.
In order to make a stand, you will need:
- 4 sheets of paper
- Scotch tape
- glue gun
- scissors
Twist the tubes. To do this, stick the adhesive tape to part of the sheet of paper as shown in the photo.
Then you need to wind this sheet onto a pencil.
It is necessary to make 3 such tubes.
On one tube you need to wind the fourth sheet.
A thin tube should pass well into a thick one.
12 cm should be cut from the first tube.
From the second we cut 2 tubes of 10 cm.
From the third we cut 10 cm.
From a thick tube, 2 segments of 3 cm and 1 segment of 12 cm must be cut.
Cut 8 cm from the remains of the tubes.
We glue the parts. It is necessary to connect 3 parts of 10 cm.
Attach 3 cm parts to the tubes.
Stick a 12 cm tube.
Glue pieces of 8 cm to the 3 cm tubes.
It remains to stick to the tubes of 8 cm tube of 12 cm and the stand is ready.
