In this review, the author of the YouTube channel "Thaitrick" will tell you what useful homemade products come from simple plastic bottles.
This is the final, third article, the two previous ones here. Article 1. Section 2.
Materials and tools.
- Soldering iron, lighter
- glue gun
- Silicone
- Scissors, stationery knife
- screwdriver
- Scotch.
So let's go!
Tip 1: Cut the bottom of a 1.5 liter bottle by 2/3. We make notches around the circumference to a depth of no more than 6 cm. Now we cut such teeth and bend these petals inwards. In such an improvised box it is quite possible to give a gift or flowers.
Tip 2: Cut the bottom of the eggplant to fit this shape. What do you think this might come in handy for? Mistresses note, this is a simple stand for the lid. The edges of the sections must be slightly melted with a lighter. In this way, dust or hair sticking to the surface of the cap can be avoided, in addition, furniture clean!
Tip 3: Have you tried to catch and separate the yolks from the protein? You don’t even need to cut anything. Just unscrew the cork from the bottle, and squeeze it a little, releasing air. Then we draw the yolk into the bottle. Be careful, sometimes there are sharp edges on the neck and the yolk may burst.
Tip 4: For the next idea, we need this sector of the bottle. We make holes and stretch the rubber there. Do not forget to fasten the ends with knots! Dress on your fingers - armor! Particularly shy housewives dedicated!
Tip 5: Do you have low vision? Or do you need to light a fire on a campaign? Make yourself a simple lens! And again, you can’t do without a plastic bottle. You will need the convex parts of the vault of the bottle. Draw a circle around the lid and make a couple of circles in this way.
Cut them with nail scissors and fold them with each other with convex sides outward. Glue most of the circumference with silicone or hot melt adhesive, leaving a small area open.
Submerge the disc in water and allow it to fill with liquid inside. Now solder the remaining sector of the circle.Here you have a simple magnifying glass!
Tip 6: This advice is especially relevant for nervous women and children. I think everyone during frying fish or other meat food at least once burned oil spray. Pretty thrills. They can be avoided if put on hand like this device. We cut the bottom of the eggplant, then we burn the places of the slices with a lighter. We make a cruciform hole in the lid. We insert a slotted handle in it ... That's it! The protective screen is ready.
Tip 7: And here's the secret to a homemade citrus juicer. Take two bottles of 0.5 and 1 liter. Cut the bottom more. Then we burn, or pierce the holes in the walls of both vessels, symmetrically on both sides at the same height. We lower the smaller bottle with its neck down into the large one, and insert a long needle or skewer into the holes, piercing both containers with it. We put the structure in the glass with its neck down. Take the citrus fruit and squeeze it, crushing it on the inner flask. It is worth taking out a smaller bottle from a larger one, as all the juice instantly spills into a glass. Fast and tasty!
Tip 8: Now you need three bottles, two identical and one smaller. Two large cut off the bottom and neck. The little one has only the bottom.
Put them one inside the other, like that. And put forward to the maximum length, according to the principle of a telescopic antenna. So it turned out a folding cover for an umbrella.
Tip 9: We knock two bottles down, put our feet under the plastic labels. So it is quite possible to reach the beach or home if the slippers are lost or torn.
Do not throw away plastic bottles! At least not all!
Thanks to the author for interesting and useful ideas for using plastic bottles!
Good luck to everyone and good mood!