The first reports of the newest Russian aircraft appeared around April 2012.
MiG-37 was shown in all its brilliance, which is interesting, even the drawings showed. For which many thanks to them. Dimensions and can be built model.
So the guys from my aircraft model group decided, and at that time it was called "Hillbilly", to create a model of this fictional plane.
They remembered the old model "Capercaillie".
They even found an old drawing.
By the way, our friend Alexander Shaparenko also worked on a similar model. He made similar sketches.
Mig-37 also looks like a capercaillie.
For the manufacture of the model used the ceiling.
Universal adhesive, moisture resistant "Titanium".
Colored adhesive tape.
Cut out the carrier plane on which everything will be mounted.
Details were cut out, adjusted in place and immediately glued.
Mounted nose of the fuselage.
Sheathed with a ceiling.
Cutting and installation of blanks for the wings.
Installation on the lower surface also began.
Fuselage .Pretty complex construction.
These are stiffening ribs.
The tail plumage appeared.
Mounted ducts.
I had to help the guys a little when covering with colored tape. Help was only in the tips of the color palette.
Stiffening ribs on the underside of the wing.
A pilot is seen behind a plastic cockpit.
We put the servos, connected the rods, the chassis made removable.
Steered front desk.
Installed a motor.
So we got a real model of a virtual airplane.
Ah, such a plane was created in America - YF-23
TTX.
Length - 1344 mm.
Span - 960 mm.
The weight of the model with a motor is 420g.
Motor 2836 1200,
Screw - 9 X 5.
Servos - NHT900.
The regulator is 40 A.
Battery -2200 3S
Model on pre-launch verification.
Or maybe she’s like an owl and her name was given to “Owl”.
This is how the model looks on the runway.
Subsequently, the model was donated to the model airplane city circle.
Photo to the album as a keepsake.