In this article we will look at how to make a fun children's toy "jumping sparrow." For the assembly of the toy you will not need any special knowledge, and everyone can make its production. It will be interesting to make such a sparrow together with a child.
To make a sparrow, the author used the following
Tools and materials:
-Two plastic plugs;
-Motor reducer;
-Rubber tape;
-Super glue;
-Wire;
-Plastic tube;
-Pliers;
-Glue gun;
-Two tablets;
-Two office gum;
-Wire;
-Switch;
-Soldering accessories;
-Cardboard;
-Pencil;
-Knife;
-Scissors;
-Paint;
-Battery;
Step One: Traffic Jams
For the toy you will need two corks from plastic bottles. In the center of traffic jams, the author drills holes.
Installs plugs on the axis of the gearbox and fixes them with hot glue.
Sticks a strip of gum to half of each cork.
Step Two: Drive
The author bends the drive from wire.
Puts two tubes on the drive.
Glues the tubes to the gear housing.
Cut two planks and drill holes in them.
Secures them to the drive.
Step Three: Gum
Tie a clerical gum in the middle and fix ka in the photo.
Step Four: Nutrition
Solders wires to the engine.
Installs the battery and power button.
Step Five: Sparrow Figure
The master made a sparrow figurine from cardboard. Outlined the assembled mechanism on cardboard. I drafted a sparrow figure. Cut holes for eye plugs. He painted the figure and stuck it on the case.
I glued my eyes to traffic jams.
I glued the same figure, on the other hand.
The bird is ready.
As a sparrow jumps, and in more detail its assembly, you can watch the video.