» Everything for sports »Suspension for speeding punching bag

Punching bag pendant

Hello dear readers and the inhabitants of our site!
In this article, the author of the YouTube channel "cemaL AÇAR" will tell you how to make a plywood pendant for a speeding punching bag.

It's sports device can be made very quickly even in home conditions, special skills and tools are not required.

Materials
- Plywood 15 mm thick
- Primer for interior work
- Spray paints
- Punching bag
- Wood screws.

Instruments, used by the author.
- Electric jigsaw
- Sandpaper
- Orbital sander
- Roulette, brush, square, pencil
- clamps
- Drill or screwdriver
- Compass.

Manufacturing process.
So, the author purchased in a sports store just such a punching bag with a mount. Now he needs to figure out how to hang it. Marks the center on a plywood sheet 700 mm wide.


He then draws a circle of 680 mm in diameter using a home-made compass. Then he cuts the workpiece with an electric jigsaw.




Scraps should not be thrown away, they will still come in handy.

Now it processes the edges with an orbital sander, and then manually with sandpaper.


Marks future supports on scraps. For a radius edge, uses a piece of plastic, bending it with an arc.



Cuts workpieces, fixing them on a workbench with a clamp.


Cleans edges from chips.

To facilitate the design and give it an aesthetic appearance, cuts openings in supports.







And again, manual stripping.


Now makes wall mounts.





Trying on the support to the mount, marks their contours.




Then he drills holes for the screws.


Applies glue to the mount, fastens the first support.





After checking the geometry, establishes a second support.



Now drills holes in the dowel mount.



He puts the shield in the center of the frame, marks out, and drills holes for the screws.



Paints the shield and frame with varnish for interior use, or with a primer.



Now spray paint the shield in white.




Having driven the cloves into a pair of boards, he paints the frame black.





Now screw the frame to the shield.





Removes the mount from the pear, screws it to the center of the shield.





And collects a pear castle.



That's all, the sports equipment remains to be fixed on the wall.

Well, start training!



Thanks to the author for a simple and useful device for athletes and entertainment!
All good mood, good luck, and interesting ideas!
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...