» Topics » Advice »How to remove a rusty nut with a handle?

How to remove a rusty nut with a lehr?

Hello dear readers and the inhabitants of our site!
In this article, Alexander, YouTube author of the Alexander Polulyakh channel, will tell you about another unusual way to remove rusty nuts with the help of a handle.

Surely almost every master met such a problem. There are many different ways to remove a nut. In one of the previous articles, I already described the wrench.

Materials
- Bolt nut.

Instruments, used by the author.
- Lerka
- Screwdriver, drill
- Vise.

Manufacturing process.
To test this method, the author took a couple of bolts with nuts.


In this case, the bolt and nut M8. Now you need to find a suitable handle and screw it onto the thread until it stops.



Through the holes in the handle the edges of the nut are visible. We select a drill of suitable diameter.


And drill the nut using the holes in the handle as guides. We drill through two holes in the handle.





Then we unscrew the lehr.


And now the nut just crumbles into two parts.






Thanks to the author for a simple but interesting way to remove rusty nuts!

All good mood, good luck, and interesting ideas!

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
Thanks to the author for a simple but interesting way to remove rusty nuts!


There are many ways, much easier and more interesting ...
For example, you can lubricate one face with acid until a bolt is exposed ...

Or here's another: make a plaster cast of the bolt, then drill the bolt, collect the chips, melt, and using the cast, cast the bolt back, but next to the nut, and not inside it! ...) xaxa

We advise you to read:

Hand it for the smartphone ...