The master works with metal and he often has to do markup on the material. Of course, you can mark it with chalk or a marker, but if you need an accurate thin line, then it is better to use a scriber. It’s not a problem to buy a scriber or to do it yourself, but an ordinary scriber’s tool is inconspicuous and often “lost”, if you carry it in your pockets, you can make a hole in your pocket, or even get injured.
Using a little ingenuity and effort, the master made a scriber in a more noticeable case, which does not perforate the pocket.
Tools and materials:
-Pen;
-Old screwdriver;
-File;
-Hacksaw;
-Pliers;
-File;
-Glue;
-Vise;
-Drill;
-USHM;
Step One: Disassembly
First you need to completely disassemble the fountain pen. The plastic cap also needs to be removed, it will come in handy in the future.
Step Two: Screwdriver
Now you need to prepare the shaft of the screwdriver, you need to make the shaft identical to the shaft of the fountain pen. The stem is rusty and the master cleans. Saw off the top of the rod. Fits under the inner diameter of the plastic cap. Sharpen the end of the rod.
Step Three: Build
It remains to collect the scriber and check. According to the master, an excellent tool turned out to be always at hand and with one click is brought into working position. Well, the pockets are whole.
