In this article, we will look at how the Master made a bird cage. The cell size is 30 by 30 cm.
For its manufacture, he used the following
Tools and materials:
-Grid;
-Plywood;
-Bar;
-Strap;
-Nails;
-Hammer;
- Electric jigsaw;
- Joiner's glue;
- Canopies;
-A pen;
Step One: The Framework
First you need to make square frames. When assembling the frames, the master uses nails and wood glue.
Step Two: Grid
Nails a wire mesh to one frame.
Inside the second frame sets two jumpers. Nails the net from the jumpers to the frame paradise.
Step Three: Frame
Assembles a cell frame.
Fastens the mesh on the side walls and on top.
Step Four: Cell Bottom
Cut and nail the bottom of plywood.
Step Five: The Door
Measures the doorway and cuts the bars to size.
Gathers the door.
Nails the net.
Tightens the hinges and hangs the door in place. Screws the handle to the door.
The bird cage is ready.