» Fixtures »Plywood hinge + drawings

Plywood hinge + drawings

Hello dear readers andthe inhabitants of our site!
In this article, the author of the thosa YouTube channel will tell you how he made a simple plywood hinge.

Materials
- sheet plywood
- PVA glue
- Bolt, washers
- Furniture nut.

Instruments, used by the author.
- Drilling machine
— 
- Scissors, knife, ruler, rasp
- Neiler
- Orbital sander
- Vise,.

Manufacturing process.
So, the author printed a template for the manufacture of parts, and pasted it on a piece of sheet plywood.



Then he cut out all the elements and polished them on the machine.




Next, the master drilled holes in the parts for the bolt.

He worked the concave surfaces of the parts with a rasp, carefully fitting them to each other.



Now proceeds to gluing the elements, first collects one side of the hinge.




He fastened the structural elements with a neiler, and glued the second part.



After the glue dries, the master collects the hinge. A wing nut will be used for clamping.



And here are the ways to use this hinge. For example, to change the angle of the countertop.

You can also use more sections, and attach the camera or monitor to the wall.

The author also kindly shared the drawings for this. fixtures, you can download them on this the link.
Thanks to the author for a simple but useful tool for the workshop!
All good mood, good luck, and interesting ideas!

Author video can be found here.
8.7
8.7
9.7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
I put the principle of this hinge into an embroidery machine, a jigsaw machine, holders for a drill, a grinder, on a milling table ... Well, on many customizable stops. In general, a working thing. Yes, and outwardly looks better than plastic.
The necessary thing !!! ... Now the author has a hinge!
... You can ... Uh ... You can ... Uh ...
Well, in short, there is a cool hinge! ... You can, for example. put on the table! And you can bring it somewhere .. And then - bring it from somewhere ... Yes, a lot of applications! ... scratch

We advise you to read:

Hand it for the smartphone ...