Do not rush to scold them for this - they will still break it in spite. Choose a subtle and sophisticated exposure. Say: thanks, there will be something to make useful and necessary homemade, proposed by Instructables under the nickname John Made - a hanger for backpacks. And having made it - independently or together with the children - place it in the most visible place. To quietly recall a broken skateboard every day.
The master begins work on the design by disassembling the skateboard with a screwdriver and a ratchet wrench:
And now all the details are separate:
The master cuts the board into two parts. Unequal, because the crack was not in the middle:
Imposes one part on another and connects with screws:
Makes holes, drills holes:
Screws on three rollers. Please note: the rollers are located on the side opposite to the recesses - they are needed so that the bolt heads do not scratch the wall or cabinet door where the hanger will be located. To ensure a clearance between the board and the roller, the master uses an additional nut.
The master installs the finished hanger on the cabinet door:
And puts backpacks on it:
Suspending (and carrying) a backpack with a handle specially designed for this purpose is recommended only when unloaded. Otherwise, this pen may come off quickly quickly. In the loaded state it is better to suspend a backpack for both straps.