Not so long ago, bottom tackle appeared on sale, reminiscent of a well-known musical instrument and named in his honor - "Banjo".
it device useful for fishing in a pond with mud and for the season of small feeding. There is a sense in using this gear, but the cost is too high, so Yuri Pugach studied this invention and made an analog do it yourself.
It was important to ensure that the tackle was universal: not only for the carp - quiet, as indicated by the creators of the original, but also sliding, which would attract other fish.
Yuri needed: ordinary five-liter bottle cap, soldering iron, small tube, piece of lead sheet, M4 screws, fishing line 50-60 cm, swivel (2 pcs), silicone stopper (2 pcs), bead (2 pcs), leash with hook, box for.
The bottle cap was taken as a basis, in which two holes must be made, for example, burned with a soldering iron.
Then, in the resulting holes, you must insert the tube and melt the ends so that it does not fall out.
Now you need a sinker, which is not difficult to make from a thin lead sheet. It is enough to cut a circle according to the size of the bottom of the lid.
To keep the feed better, larger screws were selected for attachment.
Next stage: installation of fishing equipment. A swivel must be attached to one end of the fishing line, then a stopper to adjust the slip length and the bead, as in the photo.
Now the author stuck the fishing line into the tube and secured the snap-in from the other end. At the end, you need to attach a leash with a hook to the swivel.
The invention from the means at hand is almost ready, it can be adjusted to achieve the desired result. For example, to make the gear deaf, you need to move the upper stopper to the lowest position, close to the duct. And to make the feeder sliding, it must be, on the contrary, at the top.
It remains to put food in a home-made feeding trough and insert a hook with a bait, as in "nipple" gear.
Attached to the original feeding trough is a silicone filling device so that the bait can be easily detached when removed. The cost of this pleasure is more than the unit itself, so the author found an alternative.I took a purchased box for worms and made two grooves with a soldering iron so that one almost reached the bottom, and the second about half.
At the bottom he put a bait hook, then added the bait and closed the lid.
The cork is squeezed, now it needs to be removed and the bottom tackle is ready for work.
Now you can start using it.
After successful fishing, it is very convenient to put the fishing line inside the feeder, and the feeder in a box.