This article is about how to build an automatic dog feeder. Author homemade decided that his dog is very thin. And in order that she would always have food, he built this device.
Tools and materials:
- PVC pipe;
-2 PVC couplings;
- PVC adapter;
- PVC cap;
-Plywood;
-Fasteners;
-Metal pipe;
- PVC cement;
-Aerosol paint;
-Drill;
- Electric jigsaw.
Step one: reassemble the feeder
On the PVC pipe, couplings are installed on both sides. On the one hand, an adapter installs the coupling. On the other hand, puts a stub.
Step Two: Painting
Covers the feeder with black spray paint.
Step Three: Prop
The author made the support out of plywood. He used a jigsaw to cut a circle out of plywood. I cut a hole along the edge of the support along the diameter of the metal pipe.
Step Four: Stand
The author made a stand out of a metal pipe. I drilled two holes in the pipe. I inserted the pipe into the hole in the support. I screwed the feeder to the counter.
The feeder is ready. You can now place a plate under the bottom of the feeder. Remove the cap from above, pour feed inside. Close the cap. Now you can not worry that the dog will remain hungry.