Sometimes for different needs in the garage you may need a small forge, so as not to buy expensive fixtures, it can be made from improvised materials.
Materials and tools for homemade:
• old gas stove;
• refractory brick;
• clay;
• plywood;
• pan.
Horn manufacturing process
Step 1. Basis
The basis of the whole device will be an old gas stove. The box is made of good refractory bricks, everything is coated with clay. The grate should be welded from a piece of metal, a sheet of iron, preferably thicker.
Step 2. Boost
If there is an old vacuum cleaner, you can make a boost from it, but in this case, furs are used. This way consumes significantly less coal, plus you can work out in sports. The block for furs is made using an ordinary piece of board or plywood.
Step 3. Place under the coals
Horn coal can be placed in an old large pot. Above the place where the pot will be located, you need to dig a small hole, it will play the role of a firebox. A saucepan is placed a little higher and coated with clay.
Conclusion
If you do everything slowly, the horn will be ready in a week. Sometimes on the Internet you can find information that the old iron can serve as a hard place - this is not entirely true information, it is better to use any other suitable item.
