DIY materials

With the help of such forms, very often various kinds of jewelry are made of epoxy resin, and if it is not possible to create the necessary shape for one reason or another, you can order

These cases are entirely made of aluminum alloy and consist of two elements: the main part and the cover. Note that the body parts are quite tight against each other. In the lid

These lithium-ion batteries are made in the form of a classic 9-volt crown battery. The lot contains two batteries with a declared capacity of 650 mAh, the actual is

Such a hose is intended for connecting to the compressor all kinds of pneumatic tools, such as spray guns, hacksaws, drills, etc. The sleeve is made of orange polyurethane.

On the basis of such lamps, you can make garden or interior lamps, night lights, all kinds of layouts, etc. For small crafts, you can use such LEDs. When you turn on these lamps

Such silicone circles with a thickness of about 0.4 mm - 0.5 mm are rather weakly subject to wear and are not better than the same conductive paint, which peels off quickly enough or foil. Surface

Such legs are perfect for all kinds of electronic home-made products. In addition, they can be used as a kind of "bumpers", bumpers in drawers, doors, etc. Pretty legs

Such elements are intended for the installation of printed circuit boards in cases of various kinds of electronic equipment. Boards can be installed in several "floors", as well as interconnected. Various

Such a set of fasteners will definitely come in handy when repairing all kinds of equipment, and when creating all kinds of homemade products. For example, it will be a pleasure to assemble cases with

Such holders allow you to display and fix the LEDs on the panel of any device or homemade. According to the seller, the holders are made of copper. Holders consist of several elements -

Such handles are intended for potentiometers (variable resistors) WH148. They are made of good plastic, there is completely no burr. Handles are put on with effort, sit very tight. Diameter

The threaded inserts are made of brass and are intended both for hot pressing (fusion) and for installation in pre-prepared holes - drilled or pre-designed

The hot glue gun is very widely used by masters, and the hot glue itself most often is a translucent composition, but there are also colored versions of this glue, intended

The scope of the shrink tube with a large diameter is wide, but most often it is used to isolate the battery or to give an aesthetic appearance to old batteries with