Such knives are designed to facilitate the process of performing electrical work related to stripping cables and wires. The cutting part of these tools is made of chrome vanadium steel -
Read more
Such a device is intended to mechanize the process of filing metals, wood, plastics and other relatively hard materials. To use it, you need a compressor. Fitting in
Read more
This tool is intended to automate the process of driving nails. This model is equipped with a pneumatic drive, i.e. to use it you need a compressor. Operating pressure
Read more
This device is intended for cutting glass or tile with a thickness of 3 mm to 18 mm. The working part of the glass cutter is a metal case with a sharpened roller fixed in it
Read more
An oscillating multi-tool is also called a "renovator." Allows such a device to perform work in an extremely limited space, where it is difficult to get a regular tool, and
Read more
Such a casing is intended for the removal of dust and all kinds of small particles that appear when cleaning surfaces from putty, plaster and other coatings using an angle grinder
Read more
This device is intended for measuring parameters (pitch and profile) of internal and external threaded connections. The thread gauge is a set of gear profiles fixed in the housing
Read more
Such stacks are useful when modeling from ceramics, wax, polymer clay, plasticine, etc. Using them, you can create a variety of patterns on the surface or remove excess material from
Read more
Such a device will expand the functionality of a conventional “grinder” by turning it into a belt grinder. So, it will be possible to sharpen knives or chisels, as well as
Read more
These drills are designed for drilling blind holes with a flat bottom in materials such as plastic, wood, as well as all kinds of its derivatives (fiberboard, MDF, chipboard, etc.). The main advantages of such
Read more
Such extension cords will allow work to be carried out with drills, screwdrivers, electric screwdrivers, etc. in hard to reach places. They are suitable for hex bits (1/4 "). Extenders consist of two parts:
Read more
This cutting tool is designed for finishing rough holes or chamfering, for example, from copper pipes. In addition, with it you can make holes in
Read more
The airbrush is an irreplaceable device in situations when it is required to put various structures on an uneven surface or to process large areas in the shortest possible time and at a minimum
Read more
Such extension cords are designed for work with torque wrenches, wrenches, etc. in hard to reach places. They are made of chrome vanadium steel (CrV), so there should be
Read more