Instruments

Hello, participants, visitors and creators of the site "Imdmyself.com". Today I decided to continue the topic of home-made mini-drills, mini-drills, mini-cutters, etc. It's about very

A drill was required to clean and deepen the drainage in the cellar, as a pipe was installed in the drain; it required the manufacture of a new nozzle for a smaller diameter hand drill. On metal

Hello ! In this article I want to talk about how you can make a convenient body for solder. My solder is wound on a reel and accordingly it is not very convenient to use. And I got an idea

If I have a huge amount of all kinds of tools, I do not have a single emery purchased! Although I have a lot of sandwiches, because I don’t like to change tooling during

Among my tools there is a semiautomatic welding machine. The consumable for him is copper-plated wire, which is sold on plastic coils. I usually don’t throw away these coils, but use

Hello dear friends, today I will show you a wonderful idea on how to make a mini cutting machine. With this machine you can cut various shapes on cardboard, polystyrene and other materials.

On the Internet there are many options for making (micro) or mini-drills with your own hands, but, to one degree or another, they have a number of shortcomings, which are discussed at the end of the publication (discussion).

With this ingenious device, you can measure the distance to nearby objects. This will allow you to find the point where you can fix the picture or measure the area of ​​the wall or floor. For creating

Hello dear visitors of the site. I want to bring to your attention a mini engraver (boron machine). For work you will need: A plastic pencil case for pencils (sold at any stationery store),

This article will demonstrate how Arduino can measure capacitance. This will be especially useful if you need to check the capacitance of the capacitor without marking

Hello. I want to present to your attention a device called an electroscope that is not tricky and interesting from a physical point of view. Those who have not missed physics lessons may skip the description of the principle.

There are times when you need to highlight where conventional flashlights are too expensive. In such situations, it is worth using a flexible flashlight, the manufacture of which we decided to devote this review. Start with

A power supply is a must-have item in the arsenal of any radio amateur. And I propose to assemble a very simple, but at the same time stable circuit of such a device. The scheme is not difficult, but a set of parts for assembly

Excellent use of the old 100 liter barrel and engine from the washing machine! Instead of handing over these things to scrap metal for a penny, we’ll make a miracle - a concrete mixer, with our own hands. Prices on