Steampunk

Hello, dear readers and residents of our site! In this article, the author of the Banjo Show YouTube channel will show you how he made the original oil lamp from brass sanitary fittings.

The master is fond of steampunk homemade products. This time she presents to our attention an unusual lamp. Through a vessel filled with a tonic with quinine, UV LEDs shine from above and below

Good day to all, I want to bring to your attention my next craft - matches post-apocalypse "clone". Why is it a “clone”, because these are the second matches in my performance - the first matches

Good day, today I want to show you how I made a lighter from a water adapter (half an inch by three quarters). To make a lighter I needed: an adapter (1/2

Good day, today I want to introduce my new lighter "1/2" (who cares why the "1/2" is very simple and banal, I improvise all my crafts on the go and at the end

Good day, today I want to show my creation a lighter "D.V.S." (internal combustion engine) I already made a similar case for a flash drive steampunk flash drive steampunk flash engine

The site has already presented several versions of gas lighters, but each master has his own experience and knowledge. Let's look at making another model of a gas lighter. First let's

In this article, we will consider the manufacture of a steampunk lamp. Of course, the lamp is rather decorative, but it does not look bad. For the manufacture of the lamp, the Master used

Welcome all. Today we will make a man’s metal ashtray for the workshop.Little work, and in the end we will have the original thing, instead of the old bored ashtray made of bent vinyl

The oxidation of iron is called rust. Oxidation of other metals - patina. The first fight. Chasing the second. Chased not to expel, but rather to restrain. Coin collectors, for example, say

Hello again dear readers. Now I will show you how one of the authors created an unusual homemade product, namely a lighter for a plumber. Mini start. The author had an old Gander, part

New Year inspires creativity. We decided to experiment a bit and make a Christmas tree made of metal, a so-called severe male version of the New Year’s beauty. Materials required. 1.

Frequency meter - the first, after a vulgar tester, device in the measuring laboratory of a radio amateur. Indeed, in the design and setup of equipment, the operation of which is based on the phenomenon

If you want to make an original lamp with your own hands at virtually no cost, this instruction is for you. To make such a lamp, wood waste will be needed, the author used