Aviation

The article will consider an example of creating a flying model of the Yak-3 aircraft, which can be controlled using radio control. A self-made powerful powerful glow engine is installed on the homemade product, which makes

The model considered below belongs to such category of planes as planes. Homemade has four engines. If the model is qualitatively painted, as the author did, then during the flight there will be

Surely each of us in childhood at least once made and launched a water rocket. Such homemade products are good in that they are quickly assembled and do not require any fuel, such as gunpowder, gas and so on. IN

The homemade product was assembled according to the project of Sergey Alexandrov AL-701. In the development process, it was decided to abandon the impeller model, as a basis, Pusher with UHT was taken, and also were studied

The article will consider an example of creating a flying model of the upper hand. Verkhoplan is called such aircraft, in which the wing is located on top. As the main material for construction

If you want to do air modeling, it is best to start your journey with the construction of the so-called plane. Such homemade products are assembled the easiest, and they require a minimum

All of us in childhood dreamed of assembling a flying model of an airplane, and as for a model that could be controlled using radio commands, this was generally the ultimate dream. Today has become real

The article will consider an example of a flying model of an aircraft with radio control. The author used foam board as the main material; it is light and strong enough for such home-made products.

Surely many people know such a toy as a flying propeller. It is a screw that is mounted on an axis. To start such a screw, its axis is clamped in the hands, and then parallel

Hello everyone, dear friends, today I want to share my homemade product with you. In this article I will tell you how to make a helicopter on a rubber engine out of improvised materials. Such a helicopter is not complicated in

Hello dear friends, today I will tell you and show you how to make a plane on a rubber engine with my own hands. Such an aircraft is simple to manufacture and material on it can be found in every home.

After reading this article, you will learn how to build a non-expensive quadrocopter controlled from an android device, remote control or computer. There are many steps in this project that you can

The main task that the author of the homemade set himself was to make an inexpensive quadrocopter, the flight of which will be stabilized by Arduino. Another quadrocopter has autonomous power.

This model is considered one of the easiest to manage, therefore it is suitable for a novice model pilot, and can be used as a trainer, that is, as the first model for flight training. For