Construction

In the article An Oxygen Tank Missile Oven, the Master showed us how to make an oven. In this article, he will tell us how to make a hob for this stove. The panel consists of

The rocket furnace, thanks to its parameters, has gained popularity around the world. Unpretentiousness to fuel, good heat dissipation, simplicity in manufacturing are the main advantages of such a furnace. By the way

Good day to all. For the manufacture of such a homemade product. The author took an old metal canister of 20 liters. I cleaned it with a sandblast. During sandblasting, a hole appeared that did not enter

Often using materials from stainless steel in their projects, the question of what to make the door to the master from India was not. Of course from stainless materials. Materials and tools:

A small article on how to make an oven from old brake drums of trucks. For the manufacture of the furnace, the Master used the following Tools and materials: -USHM; - Cutting discs and

Good day to all. How can I do this rocket furnace. One master will show us today. And I, in turn, will try to describe in detail each step of the author of this homemade product. For

Good day, dear residents of our site! In this article, the author of the channel 1000 DIY and TIPS will repair a dripping faucet, or rather, repair crane boxes. Someone will say that it’s easier to buy

Very often, in descriptions of various stoves, the manufacturing process of the most important and crucial part - the muffle, is either neglected, or they touch on this topic in passing, or the information is frankly

It's about the roof of my workshop. The room, of course, is important, but with a kind of "industrial" design - it is stern, reliable, but without special frills. The roof and roof, therefore,

In this article, the Wizard will tell us how to make and install the railing on the stairs. For the manufacture of railings, he needed the following Tools and materials: - Welding machine; -Machine

Health to all! I decided to gag myself alarm system and control an electromechanical lock (well, or an electric latch, if simpler). The problem statement was as follows. 1. Open the gate without

I continue to gradually collect materials, tools and equip the workplace for glass-blowing. Having assembled a device for producing carburetor gas (gasoline vapor), I was faced with the need

Last year, in late spring, we got a greenhouse with an underground heat accumulator. This spring, he completed the next batch of work to improve the design. First of all, it was equipment

In a village house, which has only two sources of dirty water - a kitchen sink and an automatic washing machine, the task was to ensure, at least partially, the disposal of drains. "Bucket system"