Instruments

Hello, dear readers and residents of our site! Already many options for bending devices have been proposed by various authors. And each of them has various advantages and disadvantages. In this

Hello, dear readers and residents of our site! Surely many of you at least once in your life used a regular whisk to beat eggs. This process takes a fairly long time. In this

Hello, dear readers and residents of our site! Surely many of the masters were faced with the need to cut various synthetic materials like plastic, organic glass,

I welcome fans to work with steel. Today we will look at how to make a useful thing out of a useless thing, at a low cost. The author decided to forge a hatchet from the spring ear, to work with such

The master is engaged in the manufacture of a racing car. In the process, he has to clean metal pipes from corrosion, old rust, etc. This work is tedious and takes

I welcome all fans to craft, today we will consider how you can make a revolving drill on the battery with your own hands. The author used a motor model 555, he is quite resourceful and

The author of Instructables under the nickname MechEngineerMike talks about the curvimeter, assembled mostly from 3D-printed parts. The following are a few of these curvimeters, as well as the ones used in them.

Greetings to fans of craftsmanship, as well as guests of the site "Imdmyself.com"! I bring to your attention my next product, which allows you to facilitate the marking of parallel lines, and you can also

The drill stand is a stationary device that facilitates the work of the master, allows you to work with solid materials, correctly center and make holes at different angles.

Hello, dear authors, journalists, readers! I decided to make a convenient mini micro drill. This is not the first such construction I have made, so first I went into selection

I welcome all fans to craft, today we will consider how to make a useful tool for repair work in places where there is no electricity. It's about such a thing as a drill on

The idea is simple, but quite effective. 13 million views on YouTube. And this is not home-made for the sake of home-made, but a really working tool. So, for its manufacture we need the following Tools and

Hello, dear readers and residents of our site! Surely almost every master is faced with the problem of loosening loose bolts, screws, and nuts. In this article, Evgeny Matveev, author of YouTube

I welcome all fans to work with steel. Today we will look at how to forge a small hatchet from a large wrench. Such an ax can be kept near the furnace and chopped with it chips for ignition.