Arduino

Hello! Now I will try to talk in detail about how to make the simplest and most affordable curvimeter. But first, let's figure out what it is and why it is needed. Actually about him

The article will consider an example of creating a very interesting nightlight that responds to a person’s approach. The closer a person is to a nightlight, the brighter it starts to glow. It eliminates

The essence of homemade work is that the lamp can be turned off without touching anything. You just need to blow it on a special sensor and after a moment the lamp itself will go out. Probably the idea was

The article will consider an example of how to assemble the simplest arrow speedometer for a bicycle. The Arduino Nano board will be used here as the controller, and as for the arrow, it

This article will discuss a simple example of creating a metal detector based on the Arduino microcontroller. Its peculiarity lies in the fact that the device is made in the form of a glove, it is located here and

This spot welder can be used to weld 18650 Li-ion batteries. To do this, you need a 7-12V power supply (12V recommended), which is used as

This project describes an Arduino device with which you can check the capacity of lithium-ion finger batteries. Quite often, laptop batteries become unusable due to

I have long seen how foreigners made car simulators by synchronizing the dashboard from the car with the game. I wanted to make my own design. So, what I needed for this: Arduino UNO R3 Wires

The article shows the creation of a robot that travels along lines and can go through labyrinths, after studying the labyrinth, it can go through it in the shortest way. The author created this project for a long time, luck overtook

During his education, the author played games with accelerometer support on his phone. He really liked driving the car on the phone just by tilting, and then he began to dream

From the name it immediately becomes clear that the robot is made on an Arduino controller. The author created his own libraries for more convenient use. The standard equipment of the robot contains

The author of this homemade product already once tried to make an autonomous robot avoiding an obstacle, and now decided to submit an improved version of it. The author decided to name the robot Bob. In the previous

The main part of the robot is the chassis of a radio-controlled tank and other components, their list will be written below. This tank is the author’s first project on the Arduino platform, and he was pleased that

The next Friday night, the author wanted to collect something interesting. Remembering that, he saw projects of drawing robots, and having a continuous rotation servo, it was decided to assemble