Hello, dear authors, journalists, readers! I decided to make a convenient mini micro drill. This is not the first such construction I have made, so first I went into selection
I welcome all fans to craft, today we will consider how to make a useful tool for repair work in places where there is no electricity. It's about such a thing as a drill on
The idea is simple, but quite effective. 13 million views on YouTube. And this is not home-made for the sake of home-made, but a really working tool. So, for its manufacture we need the following Tools and
Hello, dear readers and residents of our site! Surely almost every master is faced with the problem of loosening loose bolts, screws, and nuts. In this article, Evgeny Matveev, author of YouTube
I welcome all fans to work with steel. Today we will look at how to forge a small hatchet from a large wrench. Such an ax can be kept near the furnace and chopped with it chips for ignition.
Hello to all fans to work with steel. Today we will look at how to make a simple and reliable tomahawk from reinforcement. Such homemade products can cut branches, chop wood, and you can also
Easy to manufacture and use, the polisher was invented and manufactured by the Master. With this tool you can clean the water tap, sink or polish metal
Hello to all lovers of craftsmen, today we will consider a very useful homemade product for a country house. It's about unusual rakes with a capture function. Such a rake can rake the leaves, and
Hello, dear readers and residents of our site! In this article, the author of the YouTube channel “TOKARKA” will tell you how he made a semi-automatic impact core. Materials - Beech round timber -
I welcome fans to work with steel, today we will consider what can be done from an old broken ax. The ax made has an unusual appearance, its handle is made of reinforcement,
Hello everyone, today we will consider how to make a milling cutter from a grinder. Homemade in the assembly is not complicated, but everything is made of scrap metal. The author made his own chuck for milling cutters on his own.
Hello everyone, today we will look at how to turn a grinder into a manual wood milling machine. The homemade product turned out to be convenient to manufacture and reliable, although the author used a lathe for manufacturing
When repairing equipment, a problem often arises when removing bearings, gears and disassembling other components. Do not hit the axle or gear with a hammer, this will result in distortion or damage.
Hello, dear readers and residents of our site! As you all well know, the main tool of any master is roulette! In this article, YouTube author Hassan Abu-Izmero will share with
