Tables and chairs

Hello to all fans of craftsmen, today we will look at how to make a wonderful garage chair out of old car parts and epoxy. As a leg, the author used a shock absorber with

Hello, dear readers and residents of our site! Probably each of you likes to relax in the fresh air, and at the same time there is a desire to have a meal or arrange barbecue. But ground

The manufacture of this table is based on a rather interesting solution. It consists in the fact that the master used the edging of the ends of his table, which is not so common. In this case, the edging is not

Good day to all. Today, the author of the channel “cemaL AÇAR” will share with us another of his useful homemade products. He collected it from what was at hand at that time. MATERIALS: Metal pipe

Good day to all. In one of the previous articles, I told how the author of the channel “cemaL AÇAR” made homemade gas cylinder, in that article he used only the lower part of the cylinder, and in

This table was designed by the master to meet specific needs - it should be: 1) Large enough to lay out a textbook, laptop and notebook. 2) Durable, with no swaying

Materials: - Oak plywood 19 mm; - Oak planks for decoration; - Pine beam 50 x 70 mm .; - Standard glue for wood; - Brush made of natural bristles; - Adhesive fabric; - Varnish; - Sandpaper;

Hello, dear readers and residents of our site! The chairs are different, both folding and wooden, but sometimes the masters have completely unusual ideas. In this article, the author of the YouTube channel

Hello everyone, today I will tell you how the master made the Wooden nightstand with his own hands. So let's start Tools and materials: 1. Wood 2. Glue for wood 3. Sander 4. Sandpaper

Hello everyone, today I will tell you how the master made a laptop table with his own hands. This table can be used both for working on a laptop and for games. Tools and materials: 1.

Hello, dear readers and residents of our site! In this article, Neil, the author of YouTube channel "Pask Makes", will tell you how to make a folding seat for a workbench in a home workshop,

Good day to all. In today's article, the author of the cemaL AÇAR channel will show how he made a cool stool with his own hands out of old rubbish. For this homemade author used.

In this article, the Wizard will tell us how to make a modern coffee table. The table is made of maple board and maple plywood and has rounded edges. Tools and materials:

In the manufacture of this table, the Master set himself the following tasks: -Use of "secondary" materials -Save the appearance of the board and at the same time have a normal working surface